Chemical Engineering

1. Safety and Environmental Considerations
   1. Hazard Analysis and Risk Assessment
      1. Identification of Hazards
         1. Physical Hazards
         2. Chemical Hazards
         3. Biological Hazards
         4. Ergonomic Hazards
      2. Risk Assessment Techniques
         1. Qualitative Risk Assessment
         2. Quantitative Risk Assessment
         3. Layer of Protection Analysis (LOPA)
      3. Risk Mitigation Strategies
         1. Engineering Controls
         2. Administrative Controls
         3. Personal Protective Equipment (PPE)
         4. Emergency Response Planning
      4. Safety Culture and Behavior
         1. Safety Training Programs
         2. Safety Communication and Reporting
         3. Management Commitment
         4. Incident Investigation and Root Cause Analysis
   2. Process Safety Management (PSM)
      1. Key Elements of PSM
         1. Process Safety Information
         2. Process Hazard Analysis (PHA)
         3. Operating Procedures
         4. Mechanical Integrity
      2. Safety Instrumented Systems
         1. Safety Integrity Levels (SIL)
         2. Functional Safety Assessments
      3. Management of Change
         1. Change Assessment Procedures
         2. Documentation and Training
      4. Audits and Compliance
         1. Internal Safety Audits
         2. Regulatory Compliance Audits
         3. Continuous Improvement Techniques
      5. Training and Competency
         1. Process Safety Competency Development
         2. Scenario-based Training
   3. Environmental Regulations
      1. International Environmental Standards
         1. ISO 14001 Environmental Management Systems
         2. Global Reporting Initiative (GRI)
      2. National and Local Regulations
         1. Emission Standards
         2. Waste Disposal Laws
         3. Resource and Land Use Guidelines
      3. Permitting and Compliance
         1. Environmental Impact Assessments (EIA)
         2. Compliance Monitoring and Reporting
         3. Penalties and Enforcement
      4. Corporate Environmental Responsibility
         1. Corporate Sustainability Initiatives
         2. Environmental, Social, and Governance (ESG) Reporting
   4. Waste Management and Pollution Control
      1. Emission Reduction Techniques
         1. Flue-gas Desulfurization (FGD)
         2. Selective Catalytic Reduction (SCR)
         3. Carbon Capture and Storage (CCS)
      2. Effluent Treatment
         1. Primary, Secondary, and Tertiary Treatment Processes
         2. Biological Treatment Methods
         3. Advanced Oxidation Processes (AOPs)
      3. Resource Recovery
         1. Recycling and Reuse Strategies
         2. Energy Recovery from Waste
         3. Circular Economy Practices
      4. Solid and Hazardous Waste Management
         1. Classification and Segregation of Wastes
         2. Disposal Methods (Landfill, Incineration, Etc.)
         3. Hazardous Waste Management Plans
      5. Air and Water Pollution Control
         1. Air Quality Monitoring and Control Technologies
         2. Water Pollution Control Strategies and Technologies