Differential TTL
Differential TTL is a type of binary electrical signaling based on the transistor-transistor logic (TTL) concept. Standards implementing differential TTL include RS-422. It enables electronic systems
Multi-threshold CMOS
Multi-threshold CMOS (MTCMOS) is a variation of CMOS chip technology which has transistors with multiple threshold voltages (Vth) in order to optimize delay or power. The Vth of a MOSFET is the gate v
PMOS logic
PMOS or pMOS logic (from p-channel metal–oxide–semiconductor) is a family of digital circuits based on p-channel, enhancement mode metal–oxide–semiconductor field-effect transistors (MOSFETs). In the
SCMOS
sCMOS (scientific Complementary Metal–Oxide–Semiconductor) are a type of CMOS image sensor (CIS). These sensors are commonly used as components in specific observational scientific instruments, such a
Emitter-coupled logic
In electronics, emitter-coupled logic (ECL) is a high-speed integrated circuit bipolar transistor logic family. ECL uses an overdriven bipolar junction transistor (BJT) differential amplifier with sin
Cascode voltage switch logic
Cascode Voltage Switch Logic (CVSL) refers to a CMOS-type logic family which is designed for certain advantages. It requires mainly N-channel MOSFET transistors to implement the logic using true and c
Current-mode logic
Current mode logic (CML), or source-coupled logic (SCL), is a digital design style used both for logic gates and for board-level digital signalling of digital data . The basic principle of CML is that
BCDMOS
BCDMOS is a complex circuit composed of Bipolar, CMOS and LDMOS devices. Breakdown voltages can be as high as 750 V.
Direct-coupled transistor logic
Direct-coupled transistor logic (DCTL) is similar to resistor–transistor logic (RTL) but the input transistor bases are connected directly to the collector outputs without any base resistors. Conseque
Domino logic
Domino logic is a CMOS-based evolution of the dynamic logic techniques based on either PMOS or NMOS transistors. It allows a rail-to-rail logic swing. It was developed to speed up circuits, solving th
LVDS
No description available.
CMOS
Complementary metal–oxide–semiconductor (CMOS, pronounced "sea-moss", /siːmɑːs/, /-ɒs/) is a type of metal–oxide–semiconductor field-effect transistor (MOSFET) fabrication process that uses complement
Gunning transceiver logic
Gunning transceiver logic (GTL) is a type of logic signaling used to drive electronic backplane buses. It has a voltage swing between 0.4 volts and 1.2 volts—much lower than that used in TTL and CMOS
Logic family
In computer engineering, a logic family is one of two related concepts:
* A logic family of monolithic digital integrated circuit devices is a group of electronic logic gates constructed using one of
Beyond CMOS
Beyond CMOS refers to the possible future digital logic technologies beyond the CMOS scaling limits which limits device density and speeds due to heating effects. Beyond CMOS is the name of one of the
HVDS
No description available.
BiCMOS
Bipolar CMOS (BiCMOS) is a semiconductor technology that integrates two semiconductor technologies, those of the bipolar junction transistor and the CMOS (complementary metal-oxide-semiconductor) logi
PCMOS
Probabilistic complementary metal-oxide semiconductor (PCMOS) is a semiconductor manufacturing technology invented by Pr. Krishna Palem of Rice University and Director of NTU's (ISNE). The technology
Resistor–transistor logic
Resistor–transistor logic (RTL) (sometimes also transistor–resistor logic (TRL)) is a class of digital circuits built using resistors as the input network and bipolar junction transistors (BJTs) as sw
Power–delay product
In digital electronics, the power–delay product (PDP) is a figure of merit correlated with the energy efficiency of a logic gate or logic family. Also known as switching energy, it is the product of p
LVCMOS
Low voltage complementary metal oxide semiconductor (LVCMOS) is a low voltage class of CMOS technology digital integrated circuits.
Integrated injection logic
Integrated injection logic (IIL, I2L, or I2L) is a class of digital circuits built with multiple collector bipolar junction transistors (BJT). When introduced it had speed comparable to TTL yet was al
Level shifter
In digital electronics, a level shifter, also called logic-level shifter or voltage level translator, is a circuit used to translate signals from one logic level or voltage domain to another, allowing
Dynamic logic (digital electronics)
In integrated circuit design, dynamic logic (or sometimes clocked logic) is a design methodology in combinatory logic circuits, particularly those implemented in MOS technology. It is distinguished fr
Transistor–transistor logic
Transistor–transistor logic (TTL) is a logic family built from bipolar junction transistors. Its name signifies that transistors perform both the logic function (the first "transistor") and the amplif
High-threshold logic
High-threshold logic (HTL), also known as low-speed logic (LSL) or high-level logic (HLL), is a variant of diode–transistor logic used in environments where noise is very high.
NORBIT
In electronics, the NORBIT family of modules is a very early form (since 1960) of digital logic developed by Philips (and also provided through and Mullard) that uses modules containing discrete compo
Diode logic
Diode logic (DL), or diode-resistor logic (DRL), is the construction of Boolean logic gates from diodes. Diode logic was used extensively in the construction of early computers, where semiconductor di
Depletion-load NMOS logic
In integrated circuits, depletion-load NMOS is a form of digital logic family that uses only a single power supply voltage, unlike earlier NMOS (n-type metal-oxide semiconductor) logic families that n
Diode–transistor logic
Diode–transistor logic (DTL) is a class of digital circuits that is the direct ancestor of transistor–transistor logic. It is called so because the logic gating function (e.g., AND) is performed by a
Superconducting computing
Superconducting logic refers to a class of logic circuits or logic gates that use the unique properties of superconductors, including zero-resistance wires, ultrafast Josephson junction switches, and
Pass transistor logic
In electronics, pass transistor logic (PTL) describes several logic families used in the design of integrated circuits. It reduces the count of transistors used to make different logic gates, by elimi
Four-phase logic
Four-phase logic is a type of, and design methodology for dynamic logic. It enabled non-specialist engineers to design quite complex ICs, using either PMOS or NMOS processes.It uses a kind of 4-phase
NMOS logic
N-type metal-oxide-semiconductor logic uses n-type (-) MOSFETs (metal-oxide-semiconductor field-effect transistors) to implement logic gates and other digital circuits. These nMOS transistors operate